DIY Nursery Mobile-Cloudy with a Chance of Rain

The baby belly is growing, the pants are shrinking, and the DIY in me has come out with full force. I wanted a colorful and whimsical mobile for above the crib for Baby G. However, I didn’t want to pay the price from some fancy store that also sells $54 burp rags.

So, after gathering my trusty hot glue gun, a roll of paper towels, fishing string and colorful felt…I got to work. I spent about $4 to make this mobile. Granted, I had a few of these things on hand. If you have to start from scratch-I estimate about $10-15 to complete this project. Not bad for a pregnant woman. Not bad at all.

Here’s all that you’ll need to make your very own Cloudy with a Chance of Rain Mobile:
Newspaper
Masking Tape
Roll of Paper Towels
Flour
Thick Fishing Line and quilting needle (or a very tough needle)
Pillow Stuffing
Hot glue gun and glue sticks
Colorful felt and thread
Ric Rac, Ribbon, or something similar
White swag hooks (from Lowe’s or Home Depot, etc)

First, make “clouds” from balled up newspaper. Make them the appropriate size for the space. I chose to make a large, medium and small cloud. Use masking tape to secure the newspaper together.

Next, use a one part flour to 5 parts water mixture. Heat the water up on the stove and slowly whisk in the flour until it’s the consistency of a thick soup. Let cool.

Dip paper towels that have been cut in half into the soupy mixture and apply to the newspaper clouds, one at a time. Cover the entire cloud with a thin layer of paper towels.

While the newspaper and paper towels are still wet, use the quilting needle to pass a long piece (about 4′ total) of fishing line through the top of your cloud, about 3-4″ down from the top. Allow an equal amount of fishing line on either side (about 2′). If the cloud is larger, I recommend having two places that you pass fishing line through. This will be what the mobile hangs from.

Tie the (2) 2′ pieces of fishing line together and use a coat hanger to suspend the clouds. Let dry overnight.

Once the cloud is dry, cover the entirety of it with the pillow stuffing by using a hot glue gun. Be careful not to burn your fingers as I did, over and over and over….

Next, cut out of the felt: raindrops, umbrellas, lightening bolts, cats and dogs or whatever else your little creative mind comes up with to hang from the bottom of the cloud. I cut out two pieces per item to give it a little more strength and dimension.

Sew the two pieces together around the outside of the object.

After you have sewn all the pieces, arrange them in the order you’d like to see them “drop” from the cloud.

Attach the pieces to one another using a hot glue gun. I chose ric rac, but you can use ribbon or anything else that you fancy.

Part the stuffing at the bottom of the cloud so that you can attach the ric rac with a hot glue gun. I used a wooden skewer to push the ric rac into the bead of hot glue to avoid burning my fingers-again.

Hang each cloud from the ceiling on a swag hook, using the fishing line you sewed through the top to secure it to the hook.

Stand back and enjoy your handiwork. I know that Baby G. is going to love it!

**See what else I’ve made for the nursery: DIY Plaster Animal Heads

Linking up to these Parties:

My Repurposed Life

The Shabby Nest

Just Wingin’ It 

French Country Cottage

My Romantic Home

Bacon Time

DIY Plaster Animal Heads

I am in the throes of decorating our nursery. I know that our baby won’t care what the room looks like. Heck-as a baby-I removed the paint my father laboriously put on my nursery walls with a wet wipe.

However, since I will be spending an inordinate amount of time in this room, I wanted some pretties to look at. And, of course, I didn’t want to spend very much doing so-thus my DIY Plaster Animal Heads. If you have the patience of a cucumber and a few hours each day, you too can have very inexpensive animal heads custom made to your liking!

Here’s all that you’ll need to make your DIY Plaster Animal Heads:

Newspaper, Packing Paper
Paper Towels
Masking Tape
Cardboard
Mod Podge
Tissue Paper, Book Pages
Paintbrushes, Paint
Glitter, other accessories to decorate if desired
Plaque (I bought mine from a hobby store)
Brad Nails, Hammer
Flour, Water

Step 1:
Cut out a piece of cardboard that will be the backer to the animal head. Make sure it’s smaller than the plaque that’s been chosen.
Step 2:
Make balls out of newspaper or packing paper that will be the animal head and neck. Tape the balls together individually.
Step 3:
Tape the entire head and neck together.

Step 4:
Add a final layer of newspaper to smooth out any valleys and build up any areas that are needed for the contour of the head. Use masking tape to attach the newspaper and the cardboard backer to each head.

Step 5:
Use 4 parts water to 1 part flour to make the “plaster”. Heat up on stove and slowly whisk in flour until the consistency is a thick and soupy. Let cool.
Step 6:
Cut paper towels into 3″ x 4″ rectangles, or somewhere close to that size. I cut my select-a-size in half. Dip into the soupy plaster and squeeze off the excess.
Step 7:
Using one paper towel at a time, add a single layer of the paper towels to the head and cardboard backer.
Step 8:
Cover the entire head and cardboard backer with the plaster paper towels.

Step 9:
Let the head(s) dry completely overnight or for several hours. It was very cold out, so I placed my heads in a small bathroom and used a space heater (safely) to speed up the process. Rotate the heads and make sure the cardboard backer is completely dry as well.

Step 10:
Cut out ears for each head and use masking tape to attach to the heads.

Step 11:
Use another round of plaster and paper towels to build up eye and nose formations. Cover the entire head once more, along with the cardboard backer and the ears with another layer of paper towels.
Let the head(s) dry completely overnight.

While you’re waiting on them to dry, paint your plaques!

Step 12:
Once the head(s) are completely dry, attach to the painted plaque by gently using brad nails and a hammer. (I went the extra mile and added a little hot glue to the cardboard backer before attaching it to the plaque. I don’t think this step was necessary, but it made me feel better.)

Step 13 Alternate (1):
Here comes the fun part-decorating the heads! There are many ways to do this. Here you can see that I used mod podge and the pages of a book to cover the entire head. After cutting out a stack of small pieces from a book, I brushed a thin layer of mod podge on the back side. I placed the piece on the head and brushed another thin layer over the top. I repeated this process until the whole head was covered.

I had five heads, so I covered two with book pages.

Step 13 Alternate (2):
Here, I used the same mod podge process, but utilized fun tissue paper instead. I covered the three remaining heads with tissue paper.

Step 14:
Now, it’s time to paint! Get creative and crazy. Add glitter, rhinestones, mirror pieces, wires for whiskers, feathers, or whatever you have on hand. (Let dry completely between coats of paint).

Here are my finished heads. This one I call Frank the Zebra.

This is Lightening McQueenFox.

This is Goldy the Elephant.

This is George. Just George.

And this is Twinkles the Bunny.

I figured that I saved about $700 making these myself. Not bad for a few days’ work. If you made an animal head, what would it be?

Baby & Nursery Preparedness on a Budget

Apparently, there is a lot to do to prepare for the birth of your first. Little did I know the path we were on when we first found out we were with child.

Here are a few things I never saw coming and to be honest, slightly blindsided me:

1. I would have to buy stretchy pants-like really insane, elastic stretchy pants.
2. I would be using cocoa butter religiously (and the smell always makes me want cookies) on my ever increasing belly.
3. People would touch my stomach. These are people I don’t know and people I do know and people I wish I didn’t know.
4. I would develop a strange brown “racing stripe” down the center of my stomach.
5. I would actually find baby clothes with tiny animals on them-cute.

However, these are minor things to adjust to compared to preparing a nursery for this tiny lad/lass. I’ve always thought, “Give the kid a dresser drawer to sleep in, some milk to drink and a clean diaper. Call it done.”

But….

…then I start to imagine what kind of a sweet setup I could give to the wee little one, without spending all of their college tuition on a silly room they’ll never remember. (HAH! Like we’re paying for your college! Get a job! Cut your hair!).

With my imaginings, I lay awake at night and plot my grandiose nursery plan. The next morning, I start creating things out of almost nothings. Here’s the beginning of the wall decor for the nursery. I will share a tutorial on this as soon as it’s finished and I make sure the project is actually doable.

The mobile to hang over the crib came after much deliberation between Biceps and I. We settled on a concept-with which I will share soon. All I needed was some stuffing, some felt, some more paper mache know-how, and a few coat hangers.

PS-Is that felt? Well, it is now!

Something you must know about me-I hate curtains. Number one: the cats love to destroy them. Number two: they are stinking expensive. Number three: there are never any store-bought curtains that Biceps and I can agree on.

However, when the dollar spent is low enough, Biceps will like almost anything. Enter cheap, heavy duty drop cloths and a little Rebekah-whimsy. This too will be a tutorial I will share-as soon as it’s done. Patience, grasshopper.

And lastly, I must introduce some sort of wooden feature into this baby’s room. Why? Because it brings warmth, it reminds one of nature and of God’s creation…and it’s also inexpensive.

So, maybe this kid will get more than a dresser drawer to sleep in-but they aren’t going to be spoiled, that’s for sure. We all have to make sacrifices, kiddo. And, if I have to wear stretchy pants that sag down to my knees by the end of the day, you can pretend to like your room. Deal?

Cozy Sweater Pillows

As you know, I like to re-invent things around my home, offering a fresh look to a room with little to no cost. Sometimes I tackle huge projects-like building a table, destroying a mirror, or making my own spinning composter.

However, some days I like to make a nice hot cup of Cinnamon Apple tea and stay indoors. This is one of those days.

I love pillows on my sofas, but hate paying $20 for something that cats will eventually destroy-or I’ll spill coffee on. What’s a girl to do?

Combine thrift store pillows with my ill-fitting and ugly sweaters. That’s what!

Here’s what you’ll need to make your own Cutesy Sweater Pillows:

Old Pillows or stuffing
Old Sweaters
Backing material-I used an old canvas laundry bag
Tape Measure
Scissors
Straight Pins
Thread and Bobbin to Match
Button covers (if desired)
Invisible Thread (not pictured here, due to its invisibility)
Sewing Machine

Start by measuring the width & height of the pillow. If you are using stuffing, determine how big you want the pillow.

Measure on the sweater the width & height of the pillow and add 3 inches for seam allowance.

For example, my pillow was 14″ x 14″. I cut out two 17″ squares of sweater material.

Fold the backing material in half, measure and cut out the same sized square as the sweater.

Sandwich the sweater material (right sides facing in) with the backing material. Pin all four layers of material together.

With a 1 1/2 seam, sew the four pieces of material together on 3 sides only-leaving one side open for the pillow (or stuffing).

Cut off the excess seam, snip the four corners and turn the material right side out.

Stuff the pillow inside of its new home-or add stuffing.

Using invisible thread and a stout needle, sew the opening closed.

If desired, make a button for the center of the pillow, following the instructions on the button maker box. Sew the button(s) on with more invisible thread, going all the way through the pillow and pulling the thread tight. This will make the button dimple into the pillow.

For ruffles on the pillow, cut 3-4″ wide strips from the sweater, making them 2″ longer than the squares of sweater material and backing.

Follow all of the above instructions, except instead of sewing all 4 pieces of material together at once:
Sew one side of the backing to the wrong side of the sweater material-leaving two separate pieces total.

Sew the edges of one side of the potential ruffle using a zig zag stitch.

Fold over 1/4″ of the unsewn side of the ruffle, pinning and evenly spacing each ruffle on the right side of the sweater material.
Sew the tops of the ruffles in place.

With right sides of the sweater facing in (backing material on the outside), sew the two separate pieces together on all 3 sides with the same 1 1/2 seam, leaving an opening for the pillow or stuffing.

Cut the excess seam off, snip the corners and turn the material right side out.

Slide the pillow inside of the material or use the stuffing to fill the pillow out. Use invisible thread once again to sew up the opening.

Throw them on your fancy pink couch, brew some more tea and take a nice nap.